OSCAR Satellites AO-51, VO-52 & HO-68

-

Since I settled for the 10 element 435MHz and IO 145MHz loop antenna (IO-10EL) I have been getting into the OSCAR Satellites with ease. I have been making lots of QSO's with the home built beam fixed at 30º elevation for the past year or so on FM and SSB.

Earlier this evening I made QSO's on AO-51, HO-68 and VO-52. On AO-51(FM) I worked ON5NY, on HO-68(SSB) I worked IZ7JXJ, DJ8DT and for the second time this evening ON5NY. On VO-52(SSB) I worked IZ5AVK and DK1IE, all were good signals and all Stations could hear me at 5/9. I was running approximately 35Watts from my Yaesu FT-847 and managed to still get in to HO-68 at a total distance of 2500 miles as the the Satellite headed over North America.

I am always amazed how well my homemade antenna performs and I still get the biggest buzz when the "birds" pass over, in fact my hard done by YL - Louise M3TLL thinks I have a problem and calls me a "Satellite Junkie".

Unfortunately for Louise, there doesn't seem to be a cure available on prescription yet!

Comments

Phaze58 said…
I am almost on my way to making the 10 ele IO . will be joining you shortly ( I hope) Issues here with Franca not feeling well and with her daughter moving house I just haven't had time or money to do anything.
Was nice to hear you the other night.
9:44 pm
The Crusty Old Grognard said…
Hi,

Any idea where I can find some drawings so I can make my own 10 element yagi for satellites?

73

Matt de M6FNG
10:18 pm
MØYKS Simon said…
Hi Matt, try these links:


http://www.g6lvb.com/HomebrewArrow.htm

http://eb4dka.laserenadigital.com/Amateur%20Satellite%20Articles/IOio%20antenna.pdf

http://hamradiooperator.blogspot.com/2009/02/home-brew-ioio-mk-6-step-by-step.html
8:56 am
Paul M0PCZ said…
Hi Simon, at least your YL has an M3 call and therefore has some understanding of our radio needs..

73 Paul.
10:09 am
MØYKS Simon said…
Hi Paul,

yes it sure is handy having a her operating skills especially when I need a hand putting up antennas or mobile logging.

We actually met just over 5 years ago at work when I set up a Ham Station at the College where we both work.

All the best from Yorkshire!
10:32 am
Post a Comment

Popular posts from this blog

Full Size Delta Loop for 20M

-
Image
I came across a simple delta loop design courtesy of dxzone found on the net some time ago and have been planning to give it a go for a while. This weekend I had a couple of hours spare, so I decided to give it a go using some 2mm multi strand wire cable, a dipole centre and a mixture of 75 ohm and 50 ohm coaxial cable. The delta loop is supposed to be resonant on 20 meters but I found it to be a little high so at present I am tuning the Loop with my mfj-969 which copes extremely well. The resonant frequency is 13.2 MHz at the moment so the next chance I get, I shall shorten the overall length making sure that each of the three sides are still equal in length, and hopefully adjusting the antenna for maximum performance ATU free for 14.2 MHz. I believe the miscalculation in the resonant length is probably down to the fact that my wire is covered in the plastic sleeving from the manufacturer which always effects the swr as I have noticed in past experiments with dipoles you always get sl...
Read more

Homebrew 40/80 Trap Dipole Design

-
Image
This Antenna design was one that I used about 4 years ago, it worked exceptionally well on 80m and 40m. The size of the antenna makes a Half wave length on 80 meters, and with the traps a half wave on 40m with a SWR (standing wave ratio) of 1:1-1.5 across both bands. It worked well also on 20m with the use of an A.T.U (antenna tuning unit). I made my version of this antenna using 3mm multi strand copper cable which I left covered by the PVC insulation. The traps can either be home brewed using some 40mm diameter plastic drain pipe and winding wire around the pipe approximately 10 turns, then connected in line after the 10 metre lengths. Or the alternative is to purchase some commercially made 7.1 MHz traps, and fit them in line the same way. The antenna can be fed with 50 ohm coax with a home brew balan or again a commercially purchased balan. The wire lengths of the dipole are 2x 10 metres and 2x 6.7 metres as shown on the diagram above. This antenna can be mounted quite low to the gr...
Read more

YAESU G - 5500 Elevation Rotator Repair

-
Image
After 10 years of careful use my G-5500 eventually developed a couple of faults on the elevation rotator side.  Fault 1. For the past year I have had to guess the elevation as the readout was no longer working on the controller unit. I suspected the position switch which was located inside the rotator up above the house roof which was a pain in the butt to say the least. Fault 2. Over the winter the gearbox on the elevation rotor seized up solid. I plucked up some courage and erected my ladder and which with the aid of a rope to lower the mast it all worked out quite straight forward. Once down out with the impact driver and away I went. Once I split the case with the impact driver which was easy, I found lots of sandy grit and dried out remains of what should have or once was gearbox/bearing grease. The next step was to inspect the seized gearbox and then remove the main shaft which can only be carried out by first removing the entire gear housing u...
Read more