QSL 100%

-

As you can see i am very pleased with my recent delivery of 500 QSL cards from QSL Factory.The Cards have been custom made with a design created by my ever talented YL Louise M3TLL,if you would like one listen out for Me on the Bands and I will send one to You.

73 and hope to work you on Air soon.

If you are a SWL and here me on You can get one too! send me an email you can get the address from looking Me up on QRZ.com

Comments

Nash , JN4VWH said…
Hello from Japan,
My name is "JN4VWH".

Your nice QSL card! (^O^)
I would like to get it someday!

ps I bought the new (used) radio IC-706Mk2 (50W) last week, so it will be possible ...DX to Europe !?, I hope so..

My radios 430MHz--IC375(10W),144MHz--IC275(10W), HF+50MHz IC-703(10W).... and IC-706MkII(50W)
1:29 pm
Nash , JN4VWH said…
Hello,

My Antennas ....


I am using some mobile whip anntenas, made by "Comet" and "Diamond", in my veranda.

And a small mobile whip anntena "FA50" by "maldor" on the roof of my car.

I make the list on my blog

" - Radioamateur JN4VWH -
URL: jn4vwh.blogspot.com/ "

ps I would like to try using a blog in foreign language.

handle name "nash"
5:18 pm
MØYKS Simon said…
Hello Nash JN4VWH,thanks for commenting.I had a look at your blog it was good and I would be more than happy to exchange QSO and QSL I await your CQ call.73 and good DX to you ;)
6:58 pm
MØYKS Simon said…
i like the way you fit your radio in the Car, what car is it?
6:59 pm
Nash , JN4VWH said…
Hello Simon,

I wrote about my mobile station with some pictures on my blog. My car is Demio 1500 of Mazda, it is a very small and conpact car, so it was very difficult to install my rig in the car. Finally....(^-^;)
(jn4vwh.blogspot.com/)
11:58 am
MØYKS Simon said…
I like the installation and i am sure your mobile station will do well,hope to make the QSO mobile to mobile would be good.I will keep an interested eye on your web blog.73
12:28 pm
Post a Comment

Popular posts from this blog

New DX Contact 0n 12 Meters

-
Image
Today I managed a nice QSO with Tom ZD7X who is located at St. Helena which is quite a distance away from my location. I managed to work Tom ZD7X with a 5/9 report operating my FT-767GX with my home brew 20m delta loop assisted with the MFJ-969 to tune the antenna with 50 watts on 12 meters. 12M is rarely open and I have only had a few QSOs on this band so I guess the new Cycle has begun at last! Good DX de 2E0HTS 73
Read more

Full Size Delta Loop for 20M

-
Image
I came across a simple delta loop design courtesy of dxzone found on the net some time ago and have been planning to give it a go for a while. This weekend I had a couple of hours spare, so I decided to give it a go using some 2mm multi strand wire cable, a dipole centre and a mixture of 75 ohm and 50 ohm coaxial cable. The delta loop is supposed to be resonant on 20 meters but I found it to be a little high so at present I am tuning the Loop with my mfj-969 which copes extremely well. The resonant frequency is 13.2 MHz at the moment so the next chance I get, I shall shorten the overall length making sure that each of the three sides are still equal in length, and hopefully adjusting the antenna for maximum performance ATU free for 14.2 MHz. I believe the miscalculation in the resonant length is probably down to the fact that my wire is covered in the plastic sleeving from the manufacturer which always effects the swr as I have noticed in past experiments with dipoles you always get sl
Read more

Homebrew 40/80 Trap Dipole Design

-
Image
This Antenna design was one that I used about 4 years ago, it worked exceptionally well on 80m and 40m. The size of the antenna makes a Half wave length on 80 meters, and with the traps a half wave on 40m with a SWR (standing wave ratio) of 1:1-1.5 across both bands. It worked well also on 20m with the use of an A.T.U (antenna tuning unit). I made my version of this antenna using 3mm multi strand copper cable which I left covered by the PVC insulation. The traps can either be home brewed using some 40mm diameter plastic drain pipe and winding wire around the pipe approximately 10 turns, then connected in line after the 10 metre lengths. Or the alternative is to purchase some commercially made 7.1 MHz traps, and fit them in line the same way. The antenna can be fed with 50 ohm coax with a home brew balan or again a commercially purchased balan. The wire lengths of the dipole are 2x 10 metres and 2x 6.7 metres as shown on the diagram above. This antenna can be mounted quite low to the gr
Read more