80m Twitter Ham Net LESS Than 24HRs

-
Lots of interest has been shown so far on Twitter regarding the 1st ever 80m Twitter Ham Net, which will be held tomorrow (Wednesday 13th January) at 20.00 UTC.
Since the idea was suggested there has been a lot of Hams tweeting messages and leaving comments confirming that they will be by their Ham Radio Stations and at the same time be on Twitter tomorrow night. I can’t believe how well you have all responded from as far as The USA, to Czech Republic and the UK alike, there is a lot of enthusiastic Tweeting Hams out there!

The easiest way to join in is by getting on Twitter, create an account and either follow somebody or just search for other Hams to follow such as myself, example @2E0HTS. Once you find us all, you will easily see what were up to and which Hams are operating as well as any SWLs. All are welcome. :-)

Useful info for Twitter Ham Net Ops

- All updates can easily be searched for by using the trending topic #TWNET

- Tomorrow Nights NET - 80M. Actual Frequency will be posted at 19.55 UTC. This can be found by searching for #TWNET

Hopefully we shall have lots of fun and create some activity on 80M. If successful we could try different Bands at different Times, allowing Hams from all over the world a chance to mix Ham Radio and a bit of Internet Tweeting together to make some great QSOs.
It should be a good Net, I and many others are getting excited with less than 24 hours before the Twitter Ham Net takes to the Air for the very first time. We all Hope to hear you and be heard on the Twitter Ham 80m Net tomorrow at 20.00 UTC. It should be a great turnout, see you there!
Thank You to Everyone who is involved so far, keep up the great enthusiasm Tweeple! ;-)

Comments

Anonymous said…
This comment has been removed by a blog administrator.
7:24 am
Unknown said…
Hams tweeting messages and leaving comments confirming that they will be by their Ham Radio Stations and at the same time be on Twitter tomorrow night.Great idea.
2:56 pm
MØYKS Simon said…
Hi Brent,

Thanks a lot! ;-)

It is a fun and easy way to arrange skeds as well as share useful info and links about Ham radio and what ever else gets the braincells jumping.

All the best, hope to catch you somewhere soon.

Simon
11:49 pm
Post a Comment

Popular posts from this blog

New DX Contact 0n 12 Meters

-
Image
Today I managed a nice QSO with Tom ZD7X who is located at St. Helena which is quite a distance away from my location. I managed to work Tom ZD7X with a 5/9 report operating my FT-767GX with my home brew 20m delta loop assisted with the MFJ-969 to tune the antenna with 50 watts on 12 meters. 12M is rarely open and I have only had a few QSOs on this band so I guess the new Cycle has begun at last! Good DX de 2E0HTS 73
Read more

Full Size Delta Loop for 20M

-
Image
I came across a simple delta loop design courtesy of dxzone found on the net some time ago and have been planning to give it a go for a while. This weekend I had a couple of hours spare, so I decided to give it a go using some 2mm multi strand wire cable, a dipole centre and a mixture of 75 ohm and 50 ohm coaxial cable. The delta loop is supposed to be resonant on 20 meters but I found it to be a little high so at present I am tuning the Loop with my mfj-969 which copes extremely well. The resonant frequency is 13.2 MHz at the moment so the next chance I get, I shall shorten the overall length making sure that each of the three sides are still equal in length, and hopefully adjusting the antenna for maximum performance ATU free for 14.2 MHz. I believe the miscalculation in the resonant length is probably down to the fact that my wire is covered in the plastic sleeving from the manufacturer which always effects the swr as I have noticed in past experiments with dipoles you always get sl
Read more

Homebrew 40/80 Trap Dipole Design

-
Image
This Antenna design was one that I used about 4 years ago, it worked exceptionally well on 80m and 40m. The size of the antenna makes a Half wave length on 80 meters, and with the traps a half wave on 40m with a SWR (standing wave ratio) of 1:1-1.5 across both bands. It worked well also on 20m with the use of an A.T.U (antenna tuning unit). I made my version of this antenna using 3mm multi strand copper cable which I left covered by the PVC insulation. The traps can either be home brewed using some 40mm diameter plastic drain pipe and winding wire around the pipe approximately 10 turns, then connected in line after the 10 metre lengths. Or the alternative is to purchase some commercially made 7.1 MHz traps, and fit them in line the same way. The antenna can be fed with 50 ohm coax with a home brew balan or again a commercially purchased balan. The wire lengths of the dipole are 2x 10 metres and 2x 6.7 metres as shown on the diagram above. This antenna can be mounted quite low to the gr
Read more