ISS Contact - NA1SS - Commander Kjell N Lindgren

-

 


A little after midnight just before I headed off to bed, I thought to myself "just one more go". Wow what perfect timing as I had a lengthy chat with NA1SS International Space Station Commander Kjell.
 

I was using my Yaesu FT-847 Earth station with the 30 element 435-437 Oscar Sat antenna and 10 Element LFA Cross Yagi for 145 MHz, driven by my Yaesu G-5500 Control/rotator.


The amazing part for me is that I called out CQ once and was answered by ISS Commander Kjell using the call NA1SS. Nobody else in Europe was about so after an initial QSO and signal exchange of a real 5/9+ we had a decent rag chew lasting 5-8 mins as the ISS soared by overhead. Commander Kjell told me he has never been as active and is really enjoying working stations back on Earth from the ISS Columbus Module. I went to bed like an excited child awaiting Christmas and I am still buzzing about it now the next morning. Keep a listen out during the late passes as you may get a pleasant surprise!

Comments

PE4BAS, Bas said…
Wow, that is great Simon. I think that would be a dream of many radioamateurs. And your dream became reality. Wish you had some video made. I'm thinking what I you talking about with a astronaut? Daily life? Your antennas and radio? Or asking how the view is from above? I've no idea? Tell me.... 73, Bas
8:56 am
MØYKS Simon said…
Hi Bas, yes it was a dream come true as well as a big surprise. Great questions! I had sort of had two QSO as at first we made a typical exchange of Call sign and signal report. I had put a call out as the ISS approached and heard "M0YKS M0YKS this is NA1SS" I was shocked and went back with a slight nervousness with name, qth and signal report. I said 73, tnks etc and Kjell called to see if any more stations were about but there was no return. I decided to call back saying how unusual it was that I was alone on the air and then we started to chat. Kjell told me he was the Mission Commander operating from the Columbus module, He also said he had been licenced for two decades but had never used it as much as now on board ISS and was loving it. Kjell asked me about my station and what kind of Satellite activity I got up to and how active I was. I gave a complete station setup run down and congratulated him on a great life experience that he is engaged in. He told me about being part of ESA and that his home Country was USA. It was a perfect qso with 5/9 signals and fully quieting audio. Local time was 12.24 am so I am guessing Kjell was relaxing after his shift. Well worth listening again at the later times, you might get a surprise! de M0YKS
5:06 pm
Post a Comment

Popular posts from this blog

New DX Contact 0n 12 Meters

-
Image
Today I managed a nice QSO with Tom ZD7X who is located at St. Helena which is quite a distance away from my location. I managed to work Tom ZD7X with a 5/9 report operating my FT-767GX with my home brew 20m delta loop assisted with the MFJ-969 to tune the antenna with 50 watts on 12 meters. 12M is rarely open and I have only had a few QSOs on this band so I guess the new Cycle has begun at last! Good DX de 2E0HTS 73
Read more

Full Size Delta Loop for 20M

-
Image
I came across a simple delta loop design courtesy of dxzone found on the net some time ago and have been planning to give it a go for a while. This weekend I had a couple of hours spare, so I decided to give it a go using some 2mm multi strand wire cable, a dipole centre and a mixture of 75 ohm and 50 ohm coaxial cable. The delta loop is supposed to be resonant on 20 meters but I found it to be a little high so at present I am tuning the Loop with my mfj-969 which copes extremely well. The resonant frequency is 13.2 MHz at the moment so the next chance I get, I shall shorten the overall length making sure that each of the three sides are still equal in length, and hopefully adjusting the antenna for maximum performance ATU free for 14.2 MHz. I believe the miscalculation in the resonant length is probably down to the fact that my wire is covered in the plastic sleeving from the manufacturer which always effects the swr as I have noticed in past experiments with dipoles you always get sl
Read more

Homebrew 40/80 Trap Dipole Design

-
Image
This Antenna design was one that I used about 4 years ago, it worked exceptionally well on 80m and 40m. The size of the antenna makes a Half wave length on 80 meters, and with the traps a half wave on 40m with a SWR (standing wave ratio) of 1:1-1.5 across both bands. It worked well also on 20m with the use of an A.T.U (antenna tuning unit). I made my version of this antenna using 3mm multi strand copper cable which I left covered by the PVC insulation. The traps can either be home brewed using some 40mm diameter plastic drain pipe and winding wire around the pipe approximately 10 turns, then connected in line after the 10 metre lengths. Or the alternative is to purchase some commercially made 7.1 MHz traps, and fit them in line the same way. The antenna can be fed with 50 ohm coax with a home brew balan or again a commercially purchased balan. The wire lengths of the dipole are 2x 10 metres and 2x 6.7 metres as shown on the diagram above. This antenna can be mounted quite low to the gr
Read more