Welding Wire Dual band Satellite Yagi Project.

After seeing the pictures sent by Cyril F4FUL of his homemade dual band Arrow style Satellite Yagi, I finished off the prototype model I had been building during the week.
The newly finished off home brew Yagi antenna comprises of 4 X 144-146 MHz Elements & 8 X 432-435 MHz Elements. The Elements are made from 3.0 mm Welding Rod and the boom is a wooden broom handle. The Elements are gently tapped into 2.5mm (tight fitting) drilled holes in the boom. I used two lengths of 50 ohms Coax soldered straight on to each of the two bands driven folded dipole element.

Finished and all tuned up and ready to assemble to the mast.
I used a PVC mount which connected to the boom acting as a bush and allowed simple elevation adjustment locked off with a 6mm bolt.
Set at 30 Degrees Elevation looking southerly into this evenings sky.
Now it will be a case of testing as I have got some nice lengths of 6mm ally bar which is waiting to become either extra elements for the IOIo or a Cross Axis dual band yagi? I will have a better Idea of the best all round performance once the prototype welding wire model makes some QSO’s. I heard some good signals from South England and Scotland earlier on 144 SSB, It seems to be working ok so far only the test of time will tell.

Spring equinox and its effect on propagation

For all of you living in the Northern Hemisphere today is a great day. Today the Spring Equinox (or Vernal Equinox) is upon us, this is great as it hails goodbye to winter and officially means the start of Spring.

At 11:44 UTC the sun crossed over the Earth’s equator which means longer hours of sunlight for all of us up North! Thanks to the Earth’s tilt 23.4 degree tilt we will now be getting more of the Sun’s rays increasing the temperature (hopefully) and signalling the start of Summer.

The Spring equinox also has a marked effect on propagation. We will now be having longer hours of sunlight. These longer hours mean the sun will be increasing the energy in the ionosphere more than during the winter.

You may have noticed propagation improving over the last few weeks, this is due to the Spring equinox. The Vernal equinox is a particularly good time for HF propagation as on the first day of spring the length of the day and night in both the Northern and Southern hemispheres will be 12 hours each. During both the Spring and the Autumn equinoxes the northern and southern hemispheres both have an even distribution of solar radiation making it the optimum time for DX. As a result of the equinox bands should be more likely to stay open and there should be more reliable propagation paths between the Northern and Southern hemispheres.

Equinoxes are also the time when auroras are most likely to occur (so keep an eye out for Aurora Borealis in the night sky). Caused by solar flares colliding with nitrogen and oxygen atoms in the atmosphere they usually take place in the E and D layers of the atmosphere. Auroras affect both HF and VHF propagation, decreasing the quality of HF signals but opening up interesting possibilities for VHF operators.

For those of you wanting some light entertainment on the subject of auroras and amateur radio you might want to try the 2000 Dennis Quaid film Frequency I’m not sure you’ll be lucky enough to get the kind of propagation found in this film, but at least with Summer now officially on the way propagation might start to improve.

Fingers crossed for some decent solar activity!

de M3TLL

Homebrew Dual Band Yagi

I have recently been in qso via the Internet with Cyril F4FUL Who Is
located in the French Alps, locator square JN36EH.
Cyril had recently built an IOIo Satellite antenna and was interested in building a antenna similar to the ARROW antenna He saw me using in one of last years videos. The tests showed that the Arrow does out perform the IOIo. I agreed signal reports and comparisons with Cyril, Who then said he was on his way in building one and would keep in touch. I was interested to see what Cyril - F4FUL would come up with?
Here is the result:
The F4FUL, Home Brew, Dual Band Arrow like Yagi.
4 elements VHF and 10 elements UHF.




Thanks Cyril F4FUL, for your images. 73 Good DX!

Thanks to Cyril's inspiration, I also came across some specs for a simple antenna build similar to the Arrow. I have almost completed one and have yet to add the feeder to complete the first attempt. I have built this "prototype" antenna from 2.5mm wire and a broom handlel I will post detailed info about the latest project shortly.

Here is the information I have been looking at via the web. I used this formula to build the "prototype" Yagi. I will be trying it sometime this week.
Dimensions for a 3/6 Element Dual Band Yagi Beam

Mobile DXing working JO7CVU & 6Y/WE9V/Portable

Two Great Contacts worked from my Mobile HF Station - JO7CVU from N.JAPAN and 6Y/WE9V Portable from JAMAICA.

My Location was close by to my Home QTH up at 1000ft on Baildon Moor, W.Yorkshire, N.ENGLAND

The first QSO was JO7CVU worked on my way to work at 08.20 utc.

The second QSO was 6Y/WE9V portable worked on my return journey at 17.00 utc.

73, Thanks for all radio contacts & thanks for watching!

Early morning Mobile Dx into North Japan

This morning I was fortunate to hear some big signals coming through on my mobile work bound journey. I heard VK3MO from Austrailia with a 5/9 just as he was closing down. I then tuned up the band (20M) and came across Kentaro - JO7CVU from Sendai City, North Japan.
Ken was coming through 5/8 and peaked at 5/9, I gave Ken a quick call from the mobile FT-857 and Maldol 20M antenna and too my great surprise Ken - JO7CVU came straight back to me and gave me a 5/6 report.

I managed to sweet talk Louise M3TLL to video the contact with Ken, I should be uploading it this evening. This definately was a great copy from my mobile running 50watts in to North Japan, I will be listening out for early morning DX tomorrow.

Contesting

 Last week and this week I decided to try and work some stations during Tuesday nights RSGB VHF Contest. The Contests are held weekly on Tuesday evenings and Cover five VHF Bands. I have operated on two of the five Contest bands 144MHZ and 433MHZ.

Below is the table found at the RSGB Contest Committee Site explaining what band is used and the operating times of each Tuesday's evening Contest. Also the previous month - January's results can be seen via the Results links.

Every 1st Tuesday	2000-2230 (Local)	144MHz UK Activity Contest and Club Championship	AO AR	QTH Locators (M2) , Activity contest (S8) , Club Championship (S9)
Every 2nd Tuesday	2000-2230 (Local)	432MHz UKAC	AO AR	QTH Locators (M2) , Activity contest (S8) , Club Championship (S9)
Every 3rd Tuesday	2000-2230 (Local)	UHF UKAC	AO AR	QTH Locators (M2) , Activity contest (S8) , Club Championship (S9)
Every 4th Tuesday	2000-2230 (Local)	50MHz UKAC	AO AR	QTH Locators (M2) , Activity contest (S8) , Club Championship (S9)
Every 5th Tuesday	2000-2230 (Local)	70MHz UKAC	AO AR	QTH Locators (M2) , Activity contest (S8) , Club Championship (S9)

The contacts I made during both Contests were worked using the Yaesu FT-847 and the home made single loop horizontal antenna better known as the IOIo beam. ON 144Mhz I ran 50W and worked 17 stations with the furthest Station to be worked being M0BRA at a distance of 279km. The results were even better on 433MHz which surprised me as I only worked 10 stations with QSB and poor conditions, again I used the FT-847, IOIo antenna and this time only 35Watts. The furthest Station worked at 302km away was G5LK. Many Thanks to all Stations worked, I had a lot of fun as well as obtaining a few points!

I will be looking forward to using my humble antenna system and QRP Station in many more VHF Contests, hope to work some of you!

Most of you HF guys will have been active this weekend either Taking the ARRL Contest serious or like myself looking out for DX and giving a few points away at the same time. I made some nice QSO Sunday evening on 20M as the band stayed open until my bed time. I worked near enough 25 Stations in one hour with big signals and lots of fast signal reports/Power output exchanges. I worked on the 20M band with my Yaesu FT-847 and Vertical Antenna - Hustler 6BTV (ground mounted with 4X 20M radials). To my amazement the change in signal reflection and propagation path had influenced the change of my preferred HF Station a Yaesu FT-767GX and  Full wave Delta loop that normally does the best job for me. Not the case this time, It is good to have a choice of the two set ups. Check out the log to see the ft-847, 50W and a 6BTV performance.

Click on log to enlarge

That's all folks, until next time! 73!

The 2E0HTS Portable Antenna Mast Mount

Since I sold my Toyota Rav 4 I haven't had the means of setting up the spare Hustler 6BTV - Base Station Multi Banded HF Vertical. I used the tow bar fixing which I had made and had some excellent results with that one, not to mention the 14,411 YouTube Views on the Video I made using it.

With the first Mast Mount Creating so much attention the pressure was on to come up with another Mast Mount strong enough to bear the Hustler's 6 Band Load in windy but typical Yorkshire conditions.

I had seen some wheel bearing Mast Mounts on eBay, so I decided to make up my own version which worked out well.

Materials used:

3mm Mild Steel Plate, Cut at 260mm wide X 550mm long.
25mm X 25mm X 3mm Angle Iron (L), Two pieces cut to a length of 550mm.
70mm X 70mm X 3mm plate square, Two pieces cut in half into a triangle to become gusset supports.
200mm diameter 3mm plate, cut plate into a half circle then drill 12, 6mm holes to be used as radial mounts.
38mm diameter mild steel bar, 600mm long used as mast stub. ( I used solid bar, but pipe is also OK).

I cut the plate using a guillotine with a 6mm a capacity, The angle iron strengthening strips were cut using a hack saw. The Iron bar was cut by band saw and the holes in the plate were cut using a plasma cutting torch.
I then assembled each component using the Metal Inert Gas (M.I.G) Welding process.
click on drawing to enlarge
Each joint is welded on both sides to ensure maximum strength 
Extra support provided by using gussets.
Pre drilled for accepting different radial wave lengths and cut to mate up to the Steel bar - Mast.
Tacked up ready to finish off the M.I.G Welding fun..
Some weight removed but strength still maintained using a plasma cutting torch.
The Proud owner and fabricator of Portable Mast Mount Number 2, Me Myself and I. (and you if you email me).
3 Tonnes of Toyota Estima holding down the Mount with the Hustler 6BTV fixed to it demonstrating its function.
The result... Looking good so far, will be building up the antenna properly soon and adding a few radials whilst trying it out on the FT-857 mobile/portable set up.
More to follow  regarding using the mount and antenna the next time I go out for a drive around, I will be looking forward to that!

Last night before pulling the plug

Last night before pulling the plug, I had a last radio contact to make which was with M0OGY - Dave in North Lincolnshire.
I recently became friends with Dave - M0OGY, via the ever growing YouTube Community of "Hams" and "SWLs" that have some very interesting Amateur radio videos on YouTube.
Dave and I recently worked each other for the first time last week on 2M SSB .

Last nights QSO was worked on 80m a totally different band, which worked much better with bigger and louder signals sent and received.
Dave's Shack looks impressive and can be seen in his video as he works with a Yaesu FT-1000 Delta, G5RV and 100 Watts.

I used My Yaesu FT-767 GX, Heil GoldLine Mic, G5RV, and 50 Watts to make the contact with Dave.
Tnx Dave.
It is a useful tool to be able to use YouTube as a means of checking how your station is sounding at the other end of the QSO.
I will slightly back down the ALC after hearing myself on Dave - M0OGY's Video.

Watch Dave's YouTube Video of the QSO at his end, where you can hear us both up to no good. hi hi

Site Meter Visits

It always amazes me where in the World you are all located! Thanks again for visiting Ham Radio.Operator.Blogspot.com and

Planetham.org 73 Have a nice Sunday!

Early Morning Expedition To Muddy SOTA NP028

Early this morning I ended up working 145 FM portable from North Pennine summit on the air 028 whilst walking the dog.
I used:
My hand held radio Kenwood TH-7F and 5 watts into a Diamond SRH771 antenna. Despite been up and about early in the morning I still managed to work Kevin - M0XLT & Adrian M3IAO. Watch the video to see how I avoided the MUD bath up on The Rombalds Moor SOTA.

20 Meters Is Open!

Some Nice DX In the Log!

YouTubers Make QSO

EA1GHW Double Moxon Style Homebrew Satellite Antenna

Thanks to fellow ham and friend Edmundo - EA1GHW, I am able to show you another great home brew satellite antenna system. ED, EA1GHW from Spain has been working satellites a lot longer than myself and has had some great results with his home brew antenna systems and a couple of hand held rigs. I first saw ED in action via his YouTube video's working through AO-51 and since then we have become friends via the Internet. I keep hearing ED and ED hears me via the "birds" but unfortunately we have always had too many other stations causing lots of QRM and have yet to get each other in the log! I am sure we will get over that soon with the better weather coming and the dark nights ending.
Hear you can see ED's design on paper.

This image shows the EA1GHW satellite antenna ready to assemble.

This image shows the completed satellite dual band antenna system ready to go!

Edmundo EA1GHW mentioned that he intends to add more elements to the antenna in the near future increasing the antenna gain. He also has told me that the EA1GHW antenna is working well so far! Well done ED! thanks for sharing the images of your great antenna. Keep up the good work!
I will be listening out for ED on the future satellite passes.

A Fun Day Had By All

Sunday was a fun day for Yorkshire Radio Ham's M1PAC - Phil, M6AXL -Adam, M3TLL - Louise and myself 2E0HTS - Simon.

Adam and Phil set up their station early Sunday morning up on Rombalds moor which is high up out in the sticks near to our QTH. They were running QRP and worked through plenty of pile ups on the 144 SSB portion of the VHF bands.

Louise and I joined them in the afternoon and worked one or two nice contacts on HF which included the previously mentioned CRAG CASHOTA activation at Elslack operated by MX0BCQ/p with Kevin - M0XLT at the controls.

Our Portable/Mobile QTH

Adams New Beast of a Beam with Human Rotator Phil

Phil, Adam & Louise

The Yorkshire Moor Top Ham Brigade!

Check out the action and signals/stations worked on the video, including M0YCM-Les, G4JNN-Paul, 5D0IPY-Rachid & MX0BCQ/P-Kevin.

Craven Radio Amateur Group CRAG R.S.G.B Presentation

This week Louise - M3TLL and myself were invited to attend the Craven Radio Amateur Group Club meeting at their Club headquarters. The CRAG group are a very active group of radio amateurs that operate from North Yorkshires Craven District. On arrival we were well received by all of the Craggie's and it was great to be able to put faces to the voices I have been speaking with for so long.

The evening was very interesting as the Club had an video evening  arranged which featured the latest digital mode - D-STAR. The video was very informative and was quite exclusive as the R.S.G.B region 4 Deputy region manager Nigel - G1JKE who presented the film had not had the opportunity to show at his local club yet. 

The evening also included a special presentation to Chris - 2E0XLG who has recently upgraded his licence from his foundation call M3XLG.  Chris had made tremendous progress whilst operating under M3XLG with a maximum output power of 10 watts. Chris's achievements were outstanding during 2008 and his awards were for: Leading Foundation Licensee RSGB 144 MHZ Low power Contest 2008 & The RSGB 144 MHZ UK Activity 2008 Contest.

 Chris has also won the RSGB 6Meter UK Activity 2008 Contest as well as the RSGB 70CMS UK Activity 2008 Contest, and Chris will shortly be receiving a RSGB Shield for his amazing efforts. Well done Chris! Way to Go!

Chris 2E0XLG receiving his R.S.G.B Awards presented by Nigel G1JKE - R.S.G.B Region 4 Deputy region Manager.

We really enjoyed meeting our old friend Kevin - M0XLT and Richard- 2E0NTT as well as new Faces but known voices M1DHA - Alan, G4CPA - Geoff, G7WAW - David, G7COD - Andrew, M0DRF - Derry, 2E0ZCL - Barry, G4BLH - Mike, G1JKE - Nigel, M0GGR - Andy, M6AXL - Adam and Chris - 2E0XLG.

We will be looking forward to meeting up and also working them all again soon. The Craven Radio Amateur Group will be active this Sunday operating CASHOTA (Castles And Stately Homes On The Air) from a roman Fort nearby to Elsack in North Yorkshire.